Each 3D wall panel is 19.5 in. by 7 in., there are 10 wood panels per box with a total coverage area of 9.5 square feet. Our 3D wood panels vary in thickness and depths measuring between 0.3’’-0.75”. Panels are made with reclaimed wood.
NO POWER TOOLS OR EXPERIENCE NEEDED
Easy glue and nails installation. No heavy tools or complex mounting hardware needed. Each 3D panel has a seamless fit. We cut them precisely to fit each other perfectly making installation process seamless and fun. Panels are suitable for DIY projects AND commercial installation.
VARIABLE SURFACE APPLICATION
3D wall panels for interior wall decor can be installed on different type of surfaces including textured walls, backsplashes and ceilings. 3D panels are suitable for installation in places with higher humidity. It is important to be sure the application surface is completely dry and clear of dust/debris to ensure proper adhesion. We recommend using high-quality construction adhesive.
NATURAL RUSTIC FEEL
All panels have been naturally weathered over time by the elements and include characteristics like deeply weathered grooves and natural splitting, enabling to capture that rustic warmth that can only be achieved with a real wood accent wall.
All products are responsibly sourced, fully recyclable and 100% free of harmful pollutants. We always use only non-toxic adhesives and VOC-free paints. The result is a creation of completely unique spaces and a product you feel good about bringing into your environment.
REQUIRED TOOLS AND MATERIALS:
4’ level, Pencil, Construction Adhesive (i.e. Liquid Nails), Nail Gun or Regular Nails, Saw (Miter Saw, Jigsaw, Fine Tooth Hand Saw), Dust Mask.
PRIOR TO INSTALLATION:
Allow 3D panels to acclimate by placing them in the area you are installing for 48-72 hours.
WoodyWalls panels can be installed on variety of surfaces such as walls, backsplashes, kitchen cabinets, ceilings and headboards.
Inspect panels thoroughly prior to installation. Avoid using any damaged boards to ensure proper adhesion and to prevent any future problems -Use caution while working around wall outlets and light switches.
Keep your HVAC at 60-75ºF for a few days prior to installation as well as during and after installation.
3D panels can be installed around a code-approved fireplace as long as the surface you are applying panels to is not exposed to combustible materials.
When installing panels in places with high humidity (i.e. bathrooms), prior to installation make sure the application surface is completely dry and clear of dust/debris to insure proper adhesion.
DO NOT install as flooring.
CARE AND CLEANING INSTRUCTIONS:
WoodyWalls panels are made from real wood materials, the use of dry cloth should be the primary method of cleaning.
Wall Décor such as mirrors, pictures, TV’s and shelves can be mounted by drilling THROUGH the boards and using industry standard techniques for installation on the underlying substrate.
1. Clean the wall surface. Remove all debris, dust, grease, cover plates and protruding nails.
2. *Optional Step*- we recommend painting the surface in the same shade as planks prior to installation.
3. Use panels from different bundles to ensure even mix of colors.
4. Dry-lay panels before permanently installing to create your desired pattern.
5. Apply glue on the back of each panel. Use dry cloth to remove any excess of adhesive immediately after application.
6. Start applying the first row of panels from the lowest point of the surface going upward.
7. Press into place, secure panels with nails.
8. Always use a dust mask to protect yourself from inhaling any debris from cutting wood panels.
9. Use sanding block to smooth the cut edges if needed.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.