Frequently Asked Questions

No glue or nails needed. Each board comes with self-adhesive tape.

WoodyWalls Planks are made from real wood materials, the use of dry cloth should be the primary method of cleaning. Do not use any abrasive cleaners, polishes, wax or oil-based products on your wall.

WoodyWalls panels will stick until you decide to remodel again. The adhesive is rated for 10 years.

Woody Walls peel and stick panels utilize semi-permanent self-adhesive tape for their application. If you choose to remove Woody Walls panels, you will need to pry them from the wall. Once the planks are detached, the adhesive will need to be removed from the work surface, and some minor repairs may need to be made. To reduce damage, we recommend installing plywood on the wall before your Woody Walls installation. This way, you won’t have to repair your entire wall after removal, only the areas where the holes were drilled.

At Woody Walls, we pride ourselves on providing quality products at an affordable price designed to fit any budget. All our 100% real wood peel and stick panels – no matter the variety – are reasonably priced at $7.64 per square foot, with each box of peel and stick paneling costing just $149. In addition to our budget-friendly price, all our products ship free to anywhere in the US and Canada, helping keep your project cost down so you can do more with your budget.

Our peel and stick panels are designed to make the remodeling process quick and simple for any skill level. With no power tools or extra adhesives required for a standard application, DIY wood paneling has never been easier. Each panel comes with self-adhesive tape that makes installation as simple as peeling and sticking, making our wood wall panels suitable for DIY projects and commercial installations alike. Each panel is expertly milled for the perfect fit!
Before application, we have a few recommendations:
* Give your panels time to acclimate to the space where they will be installed, at least 48 hours.
* It is important to ensure the application surface is dry and completely clean of dust and debris before you start to ensure proper adhesion.
* Inspect your panels for any warping.
* Do a dry run with your panels by laying them out in the order you would like them installed beforehand, so you never have to hunt for the right plank.
* Have fun and let your creativity flow.
For more resources and information on installation check out our product page, and our how-to videos.

Designed with longevity and durability in mind, Woody Walls peel and stick panels will stay up until you decide it’s time to try something new. With proper care, the adhesive is rated to last for ten years, giving long-lasting beauty to your design.
With style designed to last at a price that is easy on any budget, Woody Walls peel and stick wood panels are the perfect addition to any home or office space update.

Definitely, We recommend you add extra adhesion to the back of the stick on wood planks, a few drops of liquid nails should do the trick.

Each box contains 12 peel and stick wood planks measuring 46.45″ height x 5.04″ in width and 0.18” in thickness, depending on how many boxes you order we may ship single boxes in one large box.

WoodyWalls Peel and stick wall panels are made of North American Pine wood.

Our peel and stick wood planks have high quality 3M tape strips on the back of each wood wall panel, ready for you to simply peel and stick!

Yes, our peel and stick wood planks may be sealed, however, there is a slight chance the shade of color will change. If you plan to seal the wood wall panels, we strongly advise you try it on a sample first to see if the color works for you, prior to installation.

We suggest cutting the wood wall panels that will be on the edge at a 45 degree angle, they will come together like a puzzle.

Each peel and stick wood plank is about 4/16” thick and comes in a variety of finishes.

Depending on each project, we suggest calculating the square footage of the area you plan to transform with peel and stick wood, by multiplying the height and width of the area (in inches) Then divide the sum by 144. We recommend ordering an extra 5% for trimming.

We do not recommend our peel and stick planks to be used as tabletops, since they are thin wood planks they might not hold much weight on them which would break them over time.

Yes, our peel and stick wood can be applied over tile. It is important to be sure the application surface is flat, completely dry and clear of dust/debris to ensure proper adhesion. Please avoid areas such as shower walls/saunas where wood wall panels could be directly exposed to moisture.

Yes, peel and stick planks may be used over popcorn ceilings, however, we recommend adding extra adhesive (liquid nails or construction glue) to the back of the wood panelling for extra security.

Peel and stick wall panels are strictly designed to reside indoors.

Yes, you can definitely remove our peel and stick wood. However, depending on your wall, it might take off paint or drywall because the 3M adhesive is very strong.
If you plan to remove the peel and stick wall panels, our recommendation prior to installation is to first install plywood to the surface you want to cover, then apply our peel and stick wood planks on the plywood. This way, instead of having to repair the entire wall once you remove it, you’d only have to fix the areas where the holes were nailed.

We only recommend doing this if your wall is a lighter shade than your peel and stick wood planks, we suggest painting the wall a color that is very similar to the wood wall paneling you order.

No, our peel and stick wood is not to be used as flooring, as the peel and stick wood planks are too thin, they would not be able to hold a lot of weight.

Yes, the most effective way to cut Woody Walls peel and stick wood is by simply using a miter saw. You can also use a utility knife, jigsaw or a fine toothed hand saw. Just make sure the blades are sharp enough to get a clean cut.

Yes, you may use our peel and stick wood as ceiling planks, however, we suggest securing them with 18 gauge brad nails or construction adhesive.

Yes! In fact, we recommend it! Our reclaimed wood planks can be installed on a variety of different surfaces. From textured walls, kitchen backsplashes, even all the way up to the ceiling, reclaimed wood planks are the perfect addition to any wall. Woody Walls reclaimed wood planks are even suitable for more humid spaces like bathrooms, though care must be taken to assure they do not come in direct contact with water.

Our reclaimed wood planks are made from solid timber. Every plank is responsibly sourced from the rich barn wood of actual dismantled barns. In addition to being responsibly sourced, reclaimed wood is completely recyclable. All panels have been naturally weathered for 20 years by the elements, paving the way for their unique characteristics of deeply weathered grooves and natural splitting that only time and nature can organically provide. Not only can you rest assured that your design choices are environmentally friendly and ethically sourced, but that they are 100% free of harmful pollutants and toxins, helping you breathe easier.

Installing barnwood panels is quick and simple. With easy nail and glue installation and no power tools or prior experience needed, our wood wall panels are suitable for DIY projects and commercial installation alike. We cut each plank to the perfect fit, making the installation process smooth and fun for any skill level.

Before application we have recommendations to help your process move along without a hitch.

Give your panels time to acclimate to the space where they will be installed, at least 48 hours.
It is important to ensure the application surface is dry and completely clean of dust and debris before you start to ensure proper adhesion.
Inspect your panels for any warping.
Do a dry run with your panels by laying them out in the order you would like them installed beforehand, so you never have to hunt for the right plank.
Have fun and let your creativity flow.

For more resources and information on installation check out our product page, and our how-to videos.

Even though our reclaimed wood wall planks are made of 100% real wood, they are not suitable to be used as flooring. Despite our wall panels durable and long-lasting design, they are not rated to be used as flooring. This makes reclaimed wood planks a poor choice for the task.
Reclaimed wood planks are an affordable yet elegant way to add a unique design upgrade to your home or office. Woody Walls reclaimed wood planks come in variety of finishes. With no two planks being the exact same in their texture and character, you can look froward to a one-of-a-kind finish to a one-of-a-kind project. With minimal time and effort, you can transform any wall into a work of art.

Absolutely! For better results using our reclaimed wood planks you will need liquid nails or construction glue as well as 18 gauge brad nails for extra security.

Woody Walls reclaimed wood wall box holds 12 wood wall panels, measuring 46.45″ height x 5.04″ in width and 0.25” in thickness, depending on the quantity of boxes you order, we may ship single boxes in 1 large box.
Please note our reclaimed oak panel box holds 10 planks.

Woody Walls reclaimed wood paneling has a selection of different types of reclaimed wood, some planks are made of dismantled barnwood, some come from pine, and others from oak.

Our reclaimed wood planks are best set in place with 18 gauge brad nails.

Yes, our reclaimed wood panels can be used as a backsplash. Please make sure your wall does not exceed 9% moisture content, prior to installation. Please make sure it is not directly in contact with running water.

Our reclaimed wood wall collection has wood corner trims to match along, which you may view by visiting our wood corner trim section.

Our reclaimed wood walls are about ¼” thick.

We do not recommend using our reclaimed barn wood walls to be used as tabletops, as they come from knockdown barns, the barnwood planks may develop splinters overtime.

We suggest calculating the sq.ft of the area you plan to transform with reclaimed wood paneling, multiply the height and width of the area (in inches) then divide the sum by 144 (please note: we recommend ordering an extra 5% for trimming)

Yes, our reclaimed wood wall can be applied over tile. Please be sure the application surface is flat, completely clear and dry of debris/dust to ensure proper adhesion. Please keep out of areas such as shower walls/saunas or where the wood wall panels could be directly exposed to moisture.

Yes, reclaimed wood planks can be used over popcorn ceilings, although, we recommend adding extra adhesive (liquid nails or construction glue) to the wood panelling for extra security.

WoodyWalls reclaimed wood walls are strictly designed to reside indoors.

Certainly! You may remove the reclaimed wood wall. However, you may need to make a few repairs to the drywall when you move out. If you plan to remove your reclaimed wood wall, our recommendation is to only use 18 gauge brad nails, this will make the removal process a breeze and you will have less damage to repair.

Depending on the reclaimed wood wall you choose, for example if your wall is a light color and your wood panelling is a darker shade, then we recommend you paint your wall a color close enough to the color of your reclaimed wood panelling.

Yes, the best way to cut our reclaimed wood planks is by using a miter saw, jigsaw or a fine toothed hand saw. We suggest making sure the blades are sharp enough to get a clean cut.

Yes, our reclaimed wood planks make great ceiling planks, however, please be sure to secure the wood panelling with 18 gauge brad nails and construction adhesive.

Our 3D wood panels are not only good, but they are also the perfect addition to any home or office remodel! We designed our 3D wood panels to be consumer friendly, making it easier to take your design to the next level. Each 3D wood wall panel is easy to install and comes in a variety of finishes. Installation is a breeze no matter your skill level. Our 3D panels are crafted by hand, giving you the confidence in their durability and beauty. As an added bonus all our products are environmentally friendly, responsibly sourced, fully recyclable and 100% free of harmful pollutants. We use only non-toxic adhesives and VOC-free paints for all our products so you can feel good about your design choice on every level.

Woody Walls 3D wood panels are designed with cost in mind to fit any redesign budget. Our standard 3D wood panels cost $12.52 per square foot, with each box coming in at $119. For our long 3D wood panels, the price is $12.93 per square foot, with each box still costing a mere $119 per box. Guaranteed quality at an affordable price. In addition to our budget friendly price, all our products ship free to anywhere in the US and Canada, helping keep your project cost down so you can do more with your budget.

Installing 3D wood panels is quick and simple. With easy nail and glue installation and no power tools or prior experience needed, our wood wall panels are suitable for DIY projects and commercial installation alike. We cut each 3D wood panel to the perfect fit, making the installation process smooth and fun for any skill level. Before application we have recommendations to help your process move along without a hitch.

Give your panels time to acclimate to the space where they will be installed for at least 48 hours.
It is important to be sure the application surface is dry and completely clean of dust and debris before you start to ensure proper adhesion.
Inspect your panels for any warping.
Do a dry run with your panels by laying them out in the order you would like them installed beforehand, so you never have to hunt for the right plank.
Have fun and let your creativity flow.

For more resources and information on installation check out our product page, and our how-to videos.

Woody Walls 3D wood panels can be installed on a variety of surfaces. From living room walls, bathrooms, kitchen backsplashes and beyond, our 3D wood panels are designed for most indoor flat surfaces.

Woody Walls makes adding a fresh design to your space a snap. Our 3D panels come in a variety of colors and finishes, making them fit in or stand out no matter your décor. Take your design to the next level with a product you can trust and beauty that is designed to last.

Yes, the easiest way to cut our 3D wood panel is by using a jigsaw, miter saw or a fine toothed hand saw. Please make sure the blades are sharp enough so you can get a clean cut.

No, our 3D wood panel is not suitable for flooring.

If your wall is lighter than your 3D wood panel then, we suggest painting the wall a color that is similar to the wood wall paneling you choose.

You bet! However, there is a slight chance you may need to make some repairs to the wall after our 3D walls have been removed. If you plan to remove our 3D wood, our suggestion is to use 18 gauge brad nails only, that way you would only have to repair the small holes where the 3D wood was nailed.

Woody Walls 3D decorative wall panels are strictly designed to reside indoors.

Unfortunately, at this time we do not offer 3d peel and stick wall panels.

Sure thing, our 3D wall coverings may be applied over tile. Simply make sure the application surface is completely clear and dry of debris or dust and flat to ensure proper adhesion. Please keep out of areas such as shower walls/saunas (or anywhere the wood wall panels could be directly exposed to moisture)

Indeed, 3D wall coverings can also be used over popcorn ceilings, nevertheless, we recommend adding extra adhesive (liquid nails or construction glue) to the wood panelling for extra security.

First, we advise calculating the sq.ft. of the area you will transform with 3D paneling, multiply the height and width of the area [in inches] and divide the sum by 144. Please note- we suggest ordering an extra 5% for trimming.

Yes, our 3D decorative wood panels for walls can be used as a backsplash, however, we strongly recommend not to install it anywhere directly in contact with running water.

We recommend you cut the wood wall panels which will be along the edge, at a 45 degree angle, they will come together like a puzzle.

Our 3D wall coverings are made from a mix of different types of wood such as: teak (one of the hardest, most durable of all timbers) as well as reclaimed barn wood.

We have different types of 3D Walls and they are between ¼” to ¾” thick.

WoodyWalls 3D walls come in a box which brings 6 planks measuring 19.5 “ (L) x 7” (W) x varying between 0.3”-0.75” (T), depending on your order, we may ship single boxes in a large box.

You certainly may, our 3D Walls require liquid nails or construction glue and 18 gauge brad nails for extra security.

We offer two types of panels:

• Wood Veneer Acoustic Wood Panels – Made from MDF with an oak or walnut veneer. These provide a natural look with excellent acoustic properties at an affordable price.
• Solid Wood Slat Panels – Made from solid natural wood (walnut, ash, or oak) and pre-finished with lacquer, offering premium durability and aesthetics.

Each box contains 2 wall panels, regardless of the type or size.

We offer two panel size options:

• Single wood panel size: 94 1/2” x 12″ x 7/8″
• Single wood panel size: 46” x 20 11/16” x 7/8″

Each box (2 panels) covers:

• H 94.5″ x W 24″ per box (for long panels)
• H 46″ x W 41 3/8″ per box (for wide panels)

All panels feature a 3/8” recycled PET polyester felt backing, which enhances sound absorption and durability.

Our wood wall panels have an NRC (Noise Reduction Coefficient) of 0.5, meaning they absorb up to 50% of sound waves, improving room acoustics.
They are ideal for:

• Recording studios
• Home theaters
• Bedrooms
• Commercial and residential spaces where noise reduction is needed

Yes, our slat wall panels can be installed on both walls and ceilings, but proper anchoring is essential.

Yes! Our wall panels can be easily adjusted to fit around outlets, switches, pipes, and other obstacles.

For a clean, polished look, we offer Metal Edge Trim specifically designed to complement our panels.
Available colors:

• Black
• Brushed Metal

Yes! We provide LED lighting solutions designed to integrate perfectly with our slat panels:

• Black LED channels – Virtually invisible when off, but create a stunning glow when illuminated.
• LED strip lights and complete kits, including:
  • LED strip
  • Remote control
  • Controller
  • Power supply

The acoustic slat panel range is designed for indoor use only.

You will need:

• Screws and/or construction adhesive
• Measuring tape and level
• Jigsaw or hand saw for trimming

Wood Veneer Acoustic Wood Panels – Not recommended for painting as the veneer is pre-finished.

Solid Wood Slat Panels – Already lacquered and do not require additional finishing.

Our panels can be installed in areas with moderate humidity, but for high-moisture environments like bathrooms, we recommend Solid Wood Slat Panels, as natural wood is more resistant when properly treated.

Wipe with a dry or slightly damp cloth. Avoid using harsh chemical cleaners.

Orders ship within 48 hours of purchase.
Free shipping is available across the United States (excluding Alaska and Hawaii).

If you need to return or exchange an item, you must submit your request within 30 days of receiving your order.

Return Conditions:

• Items must be unused and uncut, returned in their original condition.
• Customers are responsible for return shipping costs to our warehouse.

Returns after 30 days:

• A 15% restocking fee will apply, along with return shipping costs.

Non-returnable items:

• Samples and accessories are non-refundable and cannot be exchanged.

Refund Process: Refunds are issued after the returned items are received and inspected. Funds will be credited to the original payment method within 3-5 business days.

Non-cancelable items: Special orders and custom merchandise cannot be canceled after purchase.